UNIX Publication

- 小米平板2(latte)安装PostmarketOS: http://www.unix.pub/docs/xDoc/mipad2_latte_install_PostmarketOS/
- labwc下fcitx5安装配置方法: http://www.unix.pub/docs/xDoc/labwc_fcitx5_usage/
- tmux用法: http://www.unix.pub/docs/xDoc/tmux_usage/
- DAE用法: http://www.unix.pub/docs/xDoc/dae_usage/
- Linux透明代理: http://www.unix.pub/docs/xDoc/Linux_Transparent_proxy/
- Waydog Linux: http://www.unix.pub/docs/distributions/Waydog/
- Lilidog Linux: http://www.unix.pub/docs/distributions/Lilidog/
- APT用法: http://www.unix.pub/docs/debian/apt_usage/
- dpkg用法: http://www.unix.pub/docs/debian/dpkg_usage/
- Debian发行版: http://www.unix.pub/docs/debian/DebianReleases/
- Debian基本命令备忘录: http://www.unix.pub/docs/debian/Debian-Basic-Command-Memo/
- Debian软件包: http://www.unix.pub/docs/debian/debian_packages/
- 树莓派: http://www.unix.pub/docs/raspberrypi/
- OpenWrt: http://www.unix.pub/docs/openwrt/
- WD MyCloud Home安装运行Debian 11: http://www.unix.pub/docs/WDMyCloud/Running-Debian-11-on-WD-MyCloud-Home/
- WD MyCloud安装Debian Jessie: http://www.unix.pub/docs/WDMyCloud/Install-Debian-Jessie-on-WD-MyCloud-Gen1/
- WDMycloud救砖: http://www.unix.pub/docs/WDMyCloud/WDMycloud_Recovery/
- WDMycloud安装Debian: http://www.unix.pub/docs/WDMyCloud/WDMycloud_Crack_install_debian/
- GNU核心工具: http://www.unix.pub/docs/coreutils/
- base32命令用法: http://www.unix.pub/docs/coreutils/base32_usage/
- base64命令用法: http://www.unix.pub/docs/coreutils/base64_usage/
- basenc命令用法: http://www.unix.pub/docs/coreutils/basenc_usage/
- cat命令用法: http://www.unix.pub/docs/coreutils/cat_usage/
- fmt命令用法: http://www.unix.pub/docs/coreutils/fmt_usage/
- fold命令用法: http://www.unix.pub/docs/coreutils/fold_usage/
- head命令用法: http://www.unix.pub/docs/coreutils/head_usage/
- nl命令用法: http://www.unix.pub/docs/coreutils/nl_usage/
- od命令用法: http://www.unix.pub/docs/coreutils/od_usage/
- pr命令用法: http://www.unix.pub/docs/coreutils/pr_usage/
- tac命令用法: http://www.unix.pub/docs/coreutils/tac_usage/

# 小米平板2(latte)安装PostmarketOS[转载翻译]

## 源码
源码在github: https://github.com/xvoidee/xiaomi-latte-postmarketos. I am promoting amazing work done by postmarketos community and QuickSwift315490 who did necessary adaptations in order to get it running on latte.

## 声明​
我不对你的设备、你自己或你的环境因设备可能变砖而造成的任何损害负责。按照本指南的步骤操作即表示你同意此声明，所有操作均由你自行承担风险。

## 参考​
- postmarketos (https://postmarketos.org/)
- QuickSwift315490 - 支持小米平板2 (https://github.com/Qs315490/xiaomi-latte-flash_tools)
## 环境​
- Arch Linux
- 已经解锁的Xiaomi Mi Pad 2 16G版本
## 必须软件
安装以下软件:
```sh
$ sudo pacman -S kpartx multipath-tools android-tools
```
测试python3已经安装:
```sh
$ python --version
Python 3.14.2
```
(由于时间更新，以下输出可能略微有点不同)

## 准备pmbootstrap​
```sh
$ cd ~
$ mkdir _latte
$ cd ~/_latte
$ git clone https://gitlab.postmarketos.org/postmarketOS/pmbootstrap.git
$ cd ~/_latte/pmbootstrap
$ git checkout 3.8.0
$ git status
HEAD detached at 3.8.0
nothing to commit, working tree clean
$ cd ~/_latte
$ mkdir pmbootstrap_work
```

## 初始化设备​
重要提示：不要在`postmarketos-usb-moded-default-profile`中选择充电，保持默认值。当我在这里设置充电时，OTG 键盘无法工作。
- 工作目录为 ~/_latte/pmbootstrap_work
- 制造商vendor选xiaomi
- 设备类型选latte
- 用户名默认选user. 一些GUI桌面只支持user，不支持自定义用户。
- 扩展软件自定义添加，如vim,mc
- 桌面我选了`GNOME-mobile`，`plasma-mobile`也可以。

```sh
$ cd ~/_latte/pmbootstrap_work

$ python3 ../pmbootstrap/pmbootstrap.py init
[11:45:49] Location of the 'work' path. Multiple chroots (native, device arch, device rootfs) will be created in there.
[11:45:49] Work path [/home/xvoidee/.local/var/pmbootstrap]: ~/_latte/pmbootstrap_work
[11:46:16] Location of the 'pmaports' path, containing package definitions.
[11:46:16] pmaports path [/home/xvoidee/_latte/pmbootstrap_work/cache_git/pmaports]:
[11:46:25] Setting up the native chroot and cloning the package build recipes (pmaports)...
[11:46:25] Clone git repository: https://gitlab.postmarketos.org/postmarketOS/pmaports.git
Cloning into '/home/xvoidee/_latte/pmbootstrap_work/cache_git/pmaports'...
[11:46:50] Choose the postmarketOS release channel.
[11:46:50] Available (13):
[11:46:50] * edge: Rolling release / Most devices / Occasional breakage: https://postmarketos.org/edge
[11:46:50] * v25.12: Latest release / Recommended for best stability
[11:46:50] * v25.06: Old release (supported until 2026-01-23)
[11:46:50] Channel [edge]:
[11:47:26] NOTE: pmaports is on master branch, copying git hooks.
[11:47:26] Choose your target device vendor (either an existing one, or a new one for porting).
[11:47:26] Available vendors (103): acer, alcatel, amazon, amediatech, amlogic, apple, ark, arrow, asus, ayn, bananapi, barnesnoble, beelink, blackberry, bq, clockworkpi, cubietech, cutiepi, dongshanpi, epson, essential, fairphone, finepower, fly, fxtec, generic, goclever, google, gp, hisense, htc, huawei, inet, infocus, jolla, khadas, klipad, kobo, lark, leeco, lenovo, lg, librecomputer, linksys, lynx, mangopi, medion, meizu, microsoft, mnt, mobvoi, motorola, nextbit, nobby, nokia, nothing, nvidia, odroid, oneplus, oppo, ouya, pine64, planet, pocketbook, postmarketos, powkiddy, purism, qcom, qemu, qualcomm, radxa, raspberry, realme, rockchip, samsung, semc, sharp, shift, sipeed, solidrun, sony, sourceparts, sqfmi, starway, surftab, t2m, thundercomm, tokio, tolino, trekstor, valve, vernee, vivo, volla, wd, wexler, wiko, wileyfox, xiaomi, xunlong, yu, zte, zuk
[11:47:26] Vendor [qemu]: xiaomi
[11:47:36] Devices are categorised as follows, from best to worst:
* Main: ports where mostly everything works.
* Community: often mostly usable, but may lack important functionality.
* Testing: anything from "just boots in some sense" to almost fully functioning ports.
* Downstream: ports that use a downstream kernel — very limited functionality. Not recommended.

Available devices by codename (40): armani (downstream), begonia (testing), beryllium (community), cancro (downstream), cepheus (testing), clover (testing), dior (downstream), elish (community), equuleus (testing), ferrari (downstream), fire (downstream), fog (downstream), gemini (testing), ido (downstream), jasmine_sprout (testing), lancelot (testing), latte (testing), laurel (testing), lavender (testing), libra (downstream), merlin (downstream), miatoll (testing), monet (downstream), nabu (testing), natrium (testing), olive (downstream), perseus (testing), pine (downstream), platina (testing), polaris (testing), pyxis (testing), raphael (testing), rosemary-downstream (downstream), sagit (testing), scorpio (testing), spes (downstream), tulip (testing), vayu (testing), whyred (testing), wt88047 (testing)
[11:47:36] Device codename: latte
[11:47:44] Username [user]: user
[11:48:25] Available providers for postmarketos-base-ui-audio-backend (2):
[11:48:25] * pulseaudio: Use pulseaudio as the audio backend. (default)
[11:48:25] * pipewire: Use pipewire as the audio backend. (but may not work with all devices)
[11:48:25] Provider [default]:
[11:48:34] Available providers for postmarketos-base-ui-wifi (2):
[11:48:34] * wpa_supplicant: Use wpa_supplicant as the WiFi backend. (default)
[11:48:34] * iwd: Use iwd as the WiFi backend (but may not work with all devices)
[11:48:34] Provider [default]:
[11:48:41] Available providers for postmarketos-usb-moded-default-profile (2):
[11:48:41] * developer: Make 'developer mode' the default usb-moded profile (always enables usb networking) (default)
[11:48:41] * charging: Make 'charging mode' the default usb-moded profile (usb networking must be manually enabled)
[11:48:41] Provider [default]:
[11:49:14] Update package index for x86_64 (5 file(s))
0% [sudo] password for xvoidee:
[11:49:21] Available user interfaces (30):
[11:49:21] * none: Bare minimum OS image for testing and manual customization. The "console" UI should be selected if a graphical UI is not desired.
[11:49:21] * asteroid: (Wayland) Smartwatch UI from AsteroidOS
[11:49:21] * buffyboard: Plain framebuffer console with modern touchscreen keyboard support
[11:49:21] * cage: (Wayland) Kiosk WM
[11:49:21] * console: Console environment, with no graphical/touch UI
[11:49:21] * cosmic: COSMIC Desktop Environment from System76
[11:49:21] * fbkeyboard: Plain framebuffer console with touchscreen keyboard support
[11:49:21] * gnome: (Wayland) Gnome Shell
[11:49:21] * gnome-mobile: (Wayland) Gnome Shell patched to adapt better to phones (Experimental)
[11:49:21] * i3wm: (X11) Tiling WM (keyboard required)
[11:49:21] * kodi: (GBM) 10-foot UI useful on TV's
[11:49:21] * lomiri: (Wayland) The convergent desktop environment (Experimental)
[11:49:21] * lxqt: (X11) Lightweight Qt Desktop Environment (stylus recommended)
[11:49:21] * mate: (X11) MATE Desktop Environment, fork of GNOME2 (stylus recommended)
[11:49:21] * mediaberry: (Wayland) An open platform for streaming boxes and smart TVs (WIP)
[11:49:21] * moonlight: (Wayland) Open Source PC client for NVIDIA GameStream, as used by the NVIDIA Shield
[11:49:21] * niri: (Wayland) A scrollable-tiling compositor (DOES NOT RUN WITHOUT HW ACCELERATION!)
[11:49:21] * openbox: (X11) A highly configurable and lightweight X11 window manager (keyboard required)
[11:49:21] * os-installer: UI for installing postmarketOS
[11:49:21] * phosh: (Wayland) Mobile UI using GNOME components and apps
[11:49:21] * plasma-desktop: (Wayland) KDE Desktop Environment (works well with tablets)
[11:49:21] * plasma-mobile: (Wayland) Mobile variant of KDE Plasma
[11:49:21] * retroarch: RetroArch in KMS mode
[11:49:21] * shelli: Plain console with touchscreen gesture support
[11:49:21] * sway: (Wayland) Tiling WM, drop-in replacement for i3wm
[11:49:21] * sxmo-de-dwm: Simple Mobile: Mobile environment based on SXMO and running on dwm
[11:49:21] * sxmo-de-i3: Simple Mobile: Mobile environment based on SXMO and running on i3
[11:49:21] * sxmo-de-river: Simple Mobile: Mobile environment based on SXMO and running on river
[11:49:21] * sxmo-de-sway: Simple Mobile: Mobile environment based on SXMO and running on sway
[11:49:21] * weston: (Wayland) Reference compositor (demo, not a phone interface)
[11:49:21] * xfce4: (X11) Lightweight desktop (stylus recommended)
[11:49:21] User interface [console]: gnome-mobile
[11:50:09] Based on your UI selection, 'default' will result in installing systemd.
[11:50:09] Install systemd? (default/always/never) [default]:
[11:50:13] Additional options: extra free space: 0 MB, boot partition size: 256 MB, parallel jobs: 8, ccache per arch: 5G, sudo timer: False, mirror: http://mirror.postmarketos.org/postmarketos/
[11:50:13] Change them? (y/n) [n]:
[11:50:27] Additional packages that will be installed to rootfs. Specify them in a comma separated list (e.g.: vim,file) or "none"
[11:50:27] Extra packages [none]: vim,mc
[11:51:31] Your host timezone: Europe/Berlin
[11:51:31] Use this timezone instead of GMT? (y/n) [y]:
[11:51:33] Choose your preferred locale, like e.g. en_US. Only UTF-8 is supported, it gets appended automatically. Use tab-completion if needed.
[11:51:33] Locale [en_US]:
[11:51:35] Device hostname (short form, e.g. 'foo') [xiaomi-latte]: latte
[11:51:45] NOTE: No SSH public keys found to copy to the device.
[11:51:45] See https://postmarketos.org/ssh-key-glob for more information.
[11:51:45] After pmaports are changed, the binary packages may be outdated. If you want to install postmarketOS without changes, reply 'n' for a faster installation.
[11:51:45] Build outdated packages during 'pmbootstrap install'? (y/n) [y]:
[11:51:48] DONE!
```
## 构建镜像

Bootstrap会提示输入'host'密码(用于桌面系统)和'user'密码。

```sh
$ cd ~/_latte
$ git clone https://github.com/Qs315490/xiaomi-latte-flash_tools
$ cd ~/_latte/xiaomi-latte-flash_tools
$ python3 gpt_ini2bin.py
$ python3 ../pmbootstrap/pmbootstrap.py install --split
[11:54:29] *** (1/4) PREPARE NATIVE CHROOT ***
[sudo] password for xvoidee:
[11:54:33] Download http://dl-cdn.alpinelinux.org/alpine/edge/main/x86_64/apk-tools-static-3.0.3-r2.apk
[11:54:33] (native) Creating chroot
[11:54:37] (native) install cryptsetup util-linux parted
[11:54:39] *** (2/4) CREATE DEVICE ROOTFS ("xiaomi-latte") ***
[11:54:40] (rootfs_xiaomi-latte) Creating chroot
[11:54:47] (rootfs_xiaomi-latte) install postmarketos-base-systemd
[11:54:59] (rootfs_xiaomi-latte) install postmarketos-base device-xiaomi-latte postmarketos-ui-gnome postmarketos-base-ui-audio-backend-pulseaudio postmarketos-base-ui-wifi-wpa_supplicant vim mc postmarketos-base-nofde doas doas-sudo-shim gnome-calendar gnome-disk-utility gnome-extensions-app gnome-system-monitor snapshot decibels firefox-esr flatpak fprintd g4music gnome-calculator gnome-calendar gnome-clocks gnome-console gnome-contacts gnome-maps gnome-software gnome-software-plugin-apk gnome-text-editor gnome-weather gst-libav gst-plugins-bad gst-plugins-good gst-plugins-rs-dav1d gvfs-full loupe nautilus papers showtime snapshot tuned-ppd font-droid font-droid-nonlatin font-twemoji lang font-droid font-droid-nonlatin font-twemoji lang
[11:57:30] (rootfs_xiaomi-latte) install postmarketos-mkinitfs
[11:57:30] (rootfs_xiaomi-latte) mkinitfs
[11:57:31] *** SET LOGIN PASSWORD FOR: 'user' ***
New password:
Retype new password:
passwd: password updated successfully
[12:01:08] NOTE: No valid keymap specified for device
[12:01:11] *** (3/4) PREPARE INSTALL BLOCKDEVICE ***
[12:01:11] (native) create xiaomi-latte-boot.img (256M)
[12:01:11] (native) create xiaomi-latte-root.img (2770M)
[12:01:11] (native) mount /dev/installp1 (xiaomi-latte-boot.img)
[12:01:13] (native) mount /dev/installp2 (xiaomi-latte-root.img)
[12:01:15] (native) install e2fsprogs
[12:01:15] (native) format /dev/installp2 (root, ext4)
[12:01:15] (native) mount /dev/installp2 to /mnt/install
[12:01:16] (native) install dosfstools
[12:01:16] (native) format /dev/installp1 (boot, fat32), mount to /mnt/install/boot
[12:01:17] (native) create /etc/fstab
[12:01:17] (rootfs_xiaomi-latte) mkinitfs
[12:01:18] *** (4/4) FILL INSTALL BLOCKDEVICE ***
[12:01:18] (native) copy rootfs_xiaomi-latte to /mnt/install/
[12:01:36]
[12:01:36] *** FLASHING INFORMATION ***
[12:01:36] Refer to the installation instructions of your device, or the generic install instructions in the wiki.
[12:01:36] https://wiki.postmarketos.org/wiki/Installation_guide#pmbootstrap_flash
[12:01:36]
[12:01:36] *** SSH DAEMON INFORMATION ***
[12:01:36] SSH daemon is enabled (disable with --no-sshd).
[12:01:36] Login as 'user' with the password given during installation.
[12:01:36]
[12:01:36] *** FIREWALL INFORMATION ***
[12:01:36] Firewall is enabled, but may not work (couldn't determine if kernel supports nftables).
[12:01:36] For more information: https://postmarketos.org/firewall
[12:01:36]
[12:01:36] NOTE: chroot is still active (use 'pmbootstrap shutdown' as necessary)
[12:01:36] DONE!
```
## 导出系统镜像

```sh
$ cd ~/_latte/xiaomi-latte-flash_tools

$ python3 ../pmbootstrap/pmbootstrap.py export
[12:05:17] (rootfs_xiaomi-latte) install postmarketos-mkinitfs
[12:05:17] (rootfs_xiaomi-latte) chroot not initialized! This is a bug! Please report it.
[12:05:17] (rootfs_xiaomi-latte) initializing the chroot for you...
[12:05:18] (rootfs_xiaomi-latte) mkinitfs
[12:05:19] Export symlinks to: /tmp/postmarketOS-export
[12:05:19] * boot.img (Fastboot compatible boot.img file, contains initramfs with bootimg header <=2 and kernel)
[12:05:19] * vendor_boot.img (Fastboot compatible vendor_boot.img file, contains cmdline, initramfs and dtb. Only with bootimg header >= v3)
[12:05:19] * uInitrd (Initramfs, legacy u-boot image format)
[12:05:19] * uImage (Kernel, legacy u-boot image format)
[12:05:19] * dtbo.img (Fastboot compatible dtbo image)
[12:05:19] * xiaomi-latte.img (Rootfs with partitions for /boot and /)
[12:05:19] * xiaomi-latte-boot.img (Boot partition image)
[12:05:19] * xiaomi-latte-root.img (Root partition image)
[12:05:19] * pmos-xiaomi-latte.zip (Android recovery flashable zip)
[12:05:19] * lk2nd.img (Secondary Android bootloader)
[12:05:19] * initramfs (Initramfs)
[12:05:19] * vmlinuz (Linux kernel)
[12:05:19] NOTE: chroot is still active (use 'pmbootstrap shutdown' as necessary)
[12:05:19] DONE!
```
## 复制系统镜像
​
最终生成两个镜像文件

```sh
$ cd ~/_latte/xiaomi-latte-flash_tools

$ cp -H /tmp/postmarketOS-export/xiaomi-latte-boot.img images
$ cp -H /tmp/postmarketOS-export/xiaomi-latte-root.img images
$ ls -la images
total 2404160
drwxr-xr-x 2 xvoidee xvoidee 4096 Jan 18 12:37 .
drwxr-xr-x 5 xvoidee xvoidee 4096 Jan 18 11:54 ..
-rw-r--r-- 1 xvoidee xvoidee 228 Jan 18 11:54 gpt.bin
-rw-r--r-- 1 xvoidee xvoidee 268435456 Jan 18 12:37 xiaomi-latte-boot.img
-rw-r--r-- 1 xvoidee xvoidee 2904555520 Jan 18 12:37 xiaomi-latte-root.img
```

## 准备刷机

三个按键一起按:
- 音量上
- 音量下
- 电源
同时按住开机，设备将进入DnX模式。

![DnX mode1](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204337_675.png "DnX mode")

## 刷机
检查已连接设备
```sh
$ fastboot devices
A3X429D4BE00 Fastboot
```
切换至fastboot
```sh
$ cd ~/_latte/xiaomi-latte-flash_tools

$ fastboot boot device_files/fastboot.efi
creating boot image...
creating boot image - 4577280 bytes
Sending 'boot.img' (4470 KB) OKAY [ 0.109s]
Booting OKAY [ 0.003s]
Finished. Total time: 0.125s
```

![fastboot](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204448_562.png "fastboot")

注意会有设备代码提示'latte'

```sh
$ fastboot getvar product
product: latte
Finished. Total time: 0.033s
```
按提示开始刷机

```sh
$ cd ~/_latte/xiaomi-latte-flash_tools

$ fastboot flash oemvars device_files/oemvars.txt
Warning: skip copying oemvars image avb footer (oemvars partition size: 0, oemvars image size: 1819).
Sending 'oemvars' (1 KB) OKAY [ 0.108s]
Writing 'oemvars' OKAY [ 0.081s]
Finished. Total time: 0.513s

$ fastboot flash oemvars device_files/oemvars-battery-config-fake-disabled.txt
Warning: skip copying oemvars image avb footer (oemvars partition size: 0, oemvars image size: 85).
Sending 'oemvars' (0 KB) OKAY [ 0.109s]
Writing 'oemvars' OKAY [ 0.022s]
Finished. Total time: 0.455s

$ fastboot flash oemvars device_files/oemvars-battery-config-fake.txt
Warning: skip copying oemvars image avb footer (oemvars partition size: 0, oemvars image size: 85).
Sending 'oemvars' (0 KB) OKAY [ 0.109s]
Writing 'oemvars' OKAY [ 0.022s]
Finished. Total time: 0.441s

$ fastboot flash gpt images/gpt.bin
Warning: skip copying gpt image avb footer (gpt partition size: 0, gpt image size: 228).
Sending 'gpt' (0 KB) OKAY [ 0.109s]
Writing 'gpt' OKAY [ 0.129s]
Finished. Total time: 0.574s

$ fastboot flash boot images/xiaomi-latte-boot.img
Sending 'boot' (262144 KB) OKAY [ 7.133s]
Writing 'boot' OKAY [ 6.609s]
Finished. Total time: 13.981s

$ fastboot flash system images/xiaomi-latte-root.img
Sending sparse 'system' 1/10 (262140 KB) OKAY [ 7.139s]
Writing 'system' OKAY [ 9.494s]
Sending sparse 'system' 2/10 (253292 KB) OKAY [ 6.873s]
Writing 'system' OKAY [ 6.908s]
Sending sparse 'system' 3/10 (260626 KB) OKAY [ 7.042s]
Writing 'system' OKAY [ 7.693s]
Sending sparse 'system' 4/10 (258503 KB) OKAY [ 7.024s]
Writing 'system' OKAY [ 8.001s]
Sending sparse 'system' 5/10 (248501 KB) OKAY [ 6.772s]
Writing 'system' OKAY [ 7.461s]
Sending sparse 'system' 6/10 (259038 KB) OKAY [ 7.037s]
Writing 'system' OKAY [ 7.539s]
Sending sparse 'system' 7/10 (259300 KB) OKAY [ 7.070s]
Writing 'system' OKAY [ 7.180s]
Sending sparse 'system' 8/10 (261190 KB) OKAY [ 7.096s]
Writing 'system' OKAY [ 9.062s]
Sending sparse 'system' 9/10 (256568 KB) OKAY [ 7.027s]
Writing 'system' OKAY [ 8.466s]
Sending sparse 'system' 10/10 (24952 KB) OKAY [ 0.815s]
Writing 'system' OKAY [ 10.973s]
Finished. Total time: 148.220s
```
完成后重启设备

```sh
$ fastboot reboot
Rebooting OKAY [ 0.019s]
Finished. Total time: 0.119s
```

## 关闭安全引导

首次启动时，设备很可能因为`shim`签名而无法启动。需要设置关闭安全启动。进入BIOS，通过OTG适配器连接键盘，开机时一直按F2键——BIOS 会像平常一样弹出。然后进入设置并关闭安全启动，最后保存设置。

![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204629_454.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204703_391.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204734_524.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204800_628.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204825_647.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204859_189.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204926_120.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_204956_174.png)

## 系统使用截图

![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_205050_192.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_205059_947.png)
![](https://r2.0x8.net/imgs/ScreenShot_2026-11-02_205109_233.png)

_https://xdaforums.com/t/guide-mipad2-postmarketos-how-to-flash-postmarketos-on-mi-pad-2-16gb.4775990/_